English (United Kingdom)Viet Nam简体中文(中国)

Support Online


Office in HCM City
+84-8-38449946
+84-8-38449947


Office In Ha Noi City
+84-4-35543470
+84-4-35543471


Mr Thao
0972 853 570


Office In Ha Noi City
0084.4.35543470


Office in HCM City
0983 899 233

Products

Vturn-X200

VTURN-X200
  • Multi-tasking lathe with twin built-in spindles
  • 4-axis or 5-axis machining in one set-up
  • Roller geared swivel tool spindle
  • ATC and 40-tool magazine

Features

Specification

Items   Unit Vturn-X200
Capacity Swing over bed mm 960
Swing over carriage mm 610
Between centers mm 1123
Max. turning length mm 1000
Max. turning diameter mm 540 (limited by carriage cover)
Max. part diameter from 1st to 2ndspindle mm 210 (limited by opt. lower turret)
Travels X1-axis (upper tool spindle) mm 600
Z1-axis (upper tool spindle) mm 1100
Y-axis (upper tool spindle only) mm 160 (±80)
B-axis deg 225 (+110 ~ -115)
X2-axis (lower turret) mm 150
Z2-axis (lower turret) mm 782 (±391)
E-axis (2nd spindle) mm 1050
Axis feed X1/Z1/Y axis feed (upper tool spindle) m/min 36 / 36 / 18
X1/Z1/Y/B axis motor power kW 5.5 / 7 / 4 / 3
Ball screw dia. x pitch mm X1: 36 x P10, Z1: 40 x P12
Y: 36 x P10
X2/Z2/E feed rate (lower turret and subspindle) m/min 18 / 20 / 20
X2/Z2/E motor power kW 3 / 3 / 4
Ball screw dia. x pitch mm X2: 32 x P10, Z2: 32 x P12
E: 36 x P10
Main spindle
(1st spindle)
1st spindle nose (chuck) inch A2-6 (8")
1st spindle speed rpm 4200
1st spindle motor power (cont/20min/15%) kW 15 / 18.5 / 22
Spindle bore mm 62
Bearing inside diameter mm 100
Bar capacity mm 52
2nd spindle 2nd spindle nose (chuck) inch A2-6 (8")
2nd spindle speed rpm 4200
2nd spindle motor power (cont/20min/15%) kW 15 / 18.5 / 22
Spindle bore mm 62
Bearing inside diameter mm 100
Bar capacity mm 52
Upper tool spindle (B-axis milling head) Turret type rpm Milling head with ATC
Positioning indexing resolution deg. 5 (by coupling)
Continuous indexing resolution deg. 0.001 (by roller gear)
Max. speed rpm 12000
Milling motor power (cont. / 30 min. / 25%) kW 11 / 15 / 22
ATC & tool magazine Tool specification - HSK-T63 
(Opt. KM-63UT)
Tool capacity - 40
Tool selection - Fixed tool pot number
Max. tool diameter mm 90
Max. tool length mm 280
Max. tool weight kg 7
Tool exchange time sec 1.8 (T-T), 11 (chip-chip)
Lower turret 
(Optional.)
No. of tools - 9
Tool shank size mm □25
Max. boring bar diameter mm 40
Tool exchange time sec 1.2 (0.4 excl. disk up / down)
Machine Controller   Fanuc 31i
Tank capacity L. 560
Power requirement KVA 85 (95 with lower turret)
Floor requirement mm 5500 x 3400 x 2600
Net weight kg 12000

Standard accessories:
  • KITAGAWA® hydraulic chuck with soft jaws
  • Chip conveyor with cart
  • Spindle oil cooler
  • Fully enclosed splash guarding
  • Hand-wheel (Remote MPG)
  • Oil skimmer
  • Higher pressure coolant by Grundfos® pump SPK4-8
  • SHOWA® lubrication pump
  • Coolant flush on Z-axis cover
  • 3 step warning light
  • Air conditioner for electrical cabinet
  • Fanuc manuals by CD ROM
Optional accessories:
  • Hard jaws
  • Detachable Manual Tool Presetter (Renishaw® MTP)
  • KM-63UT tooling
  • Lower turret with tooling accessories (excl. VDI tooling)
  • Auto door
  • Bar feeder interface
  • Parts catcher (not for lower turret)
  • Air blow above (or through) chuck
  • Coolant Through Spindle (CTS)
  • Independently controlled tailstock
  • Fanuc manuals
  • Fanuc 31i-B5 control for 5-axis simultaneous machining