English (United Kingdom)Viet Nam简体中文(中国)

Product Category

Support Online


Office in HCM City
+84-8-38449946
+84-8-38449947


Office In Ha Noi City
+84-4-35543470
+84-4-35543471


Mr Thao
0972 853 570


Office In Ha Noi City
0084.4.35543470


Office in HCM City
0983 899 233

L&L CNC Heavy Duty lathe

LFM series




DIMENSION



WEIGHT

LFM Series 3000 4000 5000
LFS 1400 LxWxH (in) 8910x4050x2900 9910x4050x2900 10910x4050x2900
N.W/G.W 29000/33000 kg 30000/34000 kg 31000/33000 kg
LFS 1600 LxWxH (in) 8910x4050x2900 99100x4050x2900 10910x4050x2900
N.W/G.W 31000/35000 kg 32000/36000 kg 33500/37000 kg
LFS 1800 LxWxH (in) 8910x4050x2900 9910x4050x2900 10910x4050x2900
N.W/G.W 32000/36000 kg 33000/37000 kg 34500/39000 kg
 
LFM Series 6000 7000 8000
LFS 1400 LxWxH (in) 11910x4050x2900 12910x4050x2900 13910x4050x2900
N.W/G.W 32500/34000 kg 34500/40000 kg 35500/41000 kg
LFS 1600 LxWxH (in) 11910x4050x2900 12910x4050x2900 13910x4050x2900
N.W/G.W 34500/38000 kg 36400/41000 kg 37900/42900 kg
LFS 1800 LxWxH (in) 11910x4050x2900 12910x4050x2900 13910x4050x2900
N.W/G.W 35500/40500 kg 37800/42400 kg 38800/44500 kg


SPECIFICATIONS

MODEL LFM 1400 LFM 1600 LFM 1800
Swing over bed (V shape carriage) 1420 mm 1620 mm 1820 mm
Swing over cross slide (Box type carriage) 900 mm 1100 mm 1300 mm
Center height 750 mm 850 mm 950 mm
Distance between centers 3000 / 4000 / 5000 / 6000 / 7000 / 8000 / 9000 / 10000
Width of carriage 1000 mm
Width of cross slide 600 mm
Bed width 1160 mm
Bed way 3-V way with 1 flat way and 1 slant way
Controller FANUC 0i-TD (STD.)
Spindle  
Spindle bore 200 mm
Spindle nose ASA-A2-15
Spindle speed 4-400 RPM (4 steps speed change)
Spindle center MT#6
Spindle motor 30/37 Kw (STD.) 37/45 Kw (OPT.)
Turret  
Turret model H4-450-VDI Servo or V8-200 Hydraulic
Tool size 40 mm
X and Z axis  
X axis travel 1000 mm
Z axis travel 2750 / 3750 / 4750 / 5750 / 6750 / 7750 / 8750 / 9750 mm
X axis rapid traverse 3M~5M: 5000 mm/min; 6M~10M: 4000 mm/min
Z axis rapid traverse 3M-5M: 5000 mm/min; 6M~10M: 4000 mm/min
X axis transmitting system Ø40 mm*P5 (ballscrew)
Z axis transmitting system 3~6M Ø80 mm*P10 (ballscrew)
Direct coupling with 1:4 precision gear reducer
7~10M Ø80 mm*P10 (ballscrew)
Rotating nuts with 1:2 precision gear reducer
X axis servo motor 4 Kw
Z axis servo motor 3M~6M: 7 Kw; 7M~10M: 12.7 Kw
Through 1:4 plantary gear reducer
Tailstock  
Tailstock quill diameter 250 mm rotating quill
Tailstock movement Electric / Manual
Tailstock travel 250 mm
Tailstock boy movement Transmitted by gear reducer
Tailstock quill MT#6
Standard accessories  
Chip removing Front and rear chip conveyors
Bed ways lubrication pump 25 W
Spindle lubrication pump 1/2 HP
Coolant system 15 Bar high pressure
Guard Rear splash guard and front two doors (STD.)
Full enclosed guarding (OPT.)
Hydraulic pump 2 HP
 
NOTE :
(1) Machine equipped with different tureets will lead to differences on X and Z axis traverse.
(2) Machine equipped with different motors will lead to differences on spindle speed.
(3) Different tailstock types will affect Z axis travel.
(4) Machine length does not include the length of chip conveyor.
(5) Control: Fanuc 0i-TD (Standard), Siemens 810-D (Optional)
(6) The above specification is only for reference; the actual specification is based on the contract signed between two parties.

APPLICATIONS

 



 

 

 

LFS series




DIMENSION



WEIGHT

LFS Series 2000
LFS 1400 LxWxH (in) 7800x4050x2900
N.W/G.W 25000/28000 kg
LFS 1600 LxWxH (in) 7800x4050x2900
N.W/G.W 31000/35000 kg
LFS 1800 LxWxH (in) 7800x4050x2900
N.W/G.W 27000/28000 kg


SPECIFICATIONS

MODEL LFS 1400 LFS 1600 LFS 1800
Swing over bed (V shape carriage) 1420 mm 1620 mm 1820 mm
Swing over cross slide (Box type carriage) 900 mm 1100 mm 1300 mm
Center height 750 mm 850 mm 950 mm
Distance between centers 2000 mm
Width of carriage 1000 mm
Width of cross slide 600 mm
Bed width 1160 mm
Bed way 3-V way with 1 flat way and 1 slant way
Controller FANUC 0i-TD (STD.)
Spindle  
Spindle bore 200 mm
Spindle nose ASA-A2-15
Spindle speed 4-400 RPM (4 steps speed change)
Spindle center MT#6
Spindle motor 30/37 Kw (STD.) 37/45 Kw (OPT.)
Turret  
Turret model H4-450-VDI Servo Turret (STD.)
Tool size 40 mm
X and Z axis  
X axis travel 1000 mm
Z axis travel 1800 mm
X axis rapid traverse 5000 mm/min
Z axis rapid traverse 5000 mm/min
X axis transmitting system Ø40 mm*P5 (ballscrew)
Z axis transmitting system Ø80 mm*P10 (ballscres)
Equipped with1:4 precision gear reducer
X axis servo motor 4 Kw
Z axis servo motor 4 Kw through 1:4 planetary gear reducer
Tailstock  
Tailstock quill diameter 165 mm rotating quill
Tailstock movement Electric / Manual
Tailstock travel 250 mm
Tailstock boy movement Transmitted by gear reducer
Tailstock quill MT#6
Standard accessories  
Chip removing Front and rear chip conveyors
Bed ways lubrication pump 25 W
Spindle lubrication pump 1/2 HP
Coolant system 15 Bar high pressure
Guard Rear splash guard and front two doors (STD.)
Full enclosed guarding (OPT.)
Hydraulic pump 2 HP
 
NOTE :
(1) Machine equipped with different tureets will lead to differences on X and Z axis traverse.
(2) Machine equipped with different motors will lead to differences on spindle speed.
(3) Different tailstock types will affect Z axis travel.
(4) Machine length does not include the length of chip conveyor.
(5) Control: Fanuc 0i-TD (Standard), Siemens 810-D (Optional)
(6) The above specification is only for reference; the actual specification is based on the contract signed between two parties.

APPLICATIONS


 



 

 

 

LL series




DIMENSION



WEIGHT

LL Series BC 4000 mm BC 5000 mm BC 6000 mm BC 7000 mm BC 8000 mm
LxWxH (mm) 6470 x 3450 x 2370 7470 x 3450 x 2370 8470 x 3450 x 2370 9470 x 3450 x 2370 10470 x 3450 x 2370
N.W/G.W 16,370 / 17,070 kg 19,040 / 19,370 kg 23,250 / 24,800 kg 25,280 / 27,050 kg 27,560 / 31,560 kg


SPECIFICATIONS

MODEL LL 950
Maximum cutting diameter 950 mm
Center height 575 mm
Distance between centers 4000 / 5000 / 6000 / 7000 / 8000 mm
Control STD : FANUC 0i-TD / OPT : Siemens 810D
Width of bed 990 mm
Bed way of carriage 2 box type bed way
Bed way of tailstock 2 flat way and 1 V way
Machine length 8200 / 9200 / 10200 / 11200 / 12200 mm
headstock  
Spindle bore Ø153 Ø230 Ø350
Spindle nose A2-11 A2-15 A2-20
Spindle speed 9-600 rpm 9-450 rpm 7-400 rpm
Spindle center MT#6
Spindle power 22 / 26KW (STD) / 30 / 37KW (OPT)
turret  
Turret model V12-200 hydraulic auto tool change turret
Tool size 32 mm
tailstock  
Quill diameter 200 mm rotating quill
Quill traverse 250 mm
Tailstock center MT#6
Body movement motorized
Quill movement electric & manual
feed  
X-axis rapid traverse 5 M/min
X-axis ballscrew diameter *40 mm, pitch 5 mm
X-feed range 0.1 mm/min~3000 mm/min
X-axis traverse 480 mm
X-axis servo motor STD: 3Kw / OPT: 4Kw
Z-axis rapid traverse 4 M/min
Z-axis ballscrew diameter *63 mm, pitch 10mm
Z-axis feed rage 0.1 mm/min~3000 mm/min
Z-axis traverse 4000 / 5000 / 6000 / 7000 / 8000 mm
Z-axis transmitting 1:2 time belt (Nut rotating*ball screw is fixed)
Z-axis servo motor STD: 4Kw / OPT: 7Kw
standard accessories  
Linear scale X axis & Z axis
Hydraulic disk brake 2 sets as STD
Lubrication pump 25 W
Coolant pump 15 bar high pressure
Hydraulic pump 2 HP
Chip removing front & rear chip conveyor
Guard STD rear splash guard & front two doors
OPT full enclosed guarding
 
* Specifications subject to change without prior notice.

APPLICATIONS

 



 

 

 

LD series



DIMENSION



WEIGHT

LD Series 800 1000 2000 3000
45" LxWxH (mm) 3,420x2,800x2,160 3,620x2,800x2,160 4,620x2,800x2,160 5,620x2,800x2,160
N.W/G.W 10,400/12,400 kg 10,700/12,700 kg 11,900/14,140 kg 13,100/15,580 kg
48" LxWxH (mm) 3,420x2,800x2,160 3,620x2,800x2,160 4,620x2,800x2,160 5,620x2,800x2,160
N.W/G.W 10,900/13,000 kg 11,200/13,300 kg 12,400/14,740 kg 13,600/16,180 kg

 

LD Series 4000 5000 6000 7000
45" LxWxH (mm) 6,620x2,800x2,160 7,620x2,800x2,160 8,300x2,800x2,160 9,300x2,800x2,160
N.W/G.W 14,300/17,020 kg 15,300/18,460 kg 16,700/19,900 kg 17,900/21,340 kg
48" LxWxH (mm) 6,620x2,800x2,160 7,620x2,800x2,160 8,300x2,800x2,160 9,300x2,800x2,160
N.W/G.W 14,800/17,620 kg 16,000/19,060 kg 17,200/20,500 kg 18,400/21,940 kg


SPECIFICATIONS

MODEL LD 45 LD 48
SWING OVER BED 1,120 mm 1,220 mm
SWING OVER CROSS SLIDE 750 mm 850 mm
CENTER HEIGHT 575 mm 625 mm
WIDTH OF CARRIAGE 950 mm
WIDTH OF CROSS SLIDE 400 mm
DISTANCE BETWEEN CENTERS 1,200mm / 2,200mm / 3,200mm / 4,200mm / 5,200mm / 6,200mm / 7,200mm
CONTROL STD. FANUC 0iTC
OPT. FANUC 21iTB ; SIEMENS810D ; FAGOR8055TC
WIDTH OF BED 610mm(24")
BED WAY 3-V way with 1 flat way
MACHINE LENGTH 3,620mm / 4,620mm / 5,620mm / 6,620mm / 7,620mm / 8,300mm / 9,300mm
HEADSTOCK :    
SPINDLE BORE Ø153mm(6") Ø230mm(9") Ø305mm(12") Ø405mm(16") Ø505mm(20")
SPINDLE NOSE A2-11 A2-15 A2-20 A2-28 A2-28
SPINDLE SPEED 9~600rpm 9~450rpm 7~400rpm 6~250rpm 5~220rpm
SPINDLE CENTER 153mm(6") : MT#5 ; 230mm/305mm/365mm/405mm/505mm(9"/12"/14.5"/16"/20") : MT#6
SPINDLE POWER 22/26KW (FANUC αi)(STD) ; 30/37KW (OPT)
TURRET :    
TURRET MODE STD. H4-350 hydraulic ; V8-160L hydraulic
OPT. H4-350 VDI hydraulic ; Quick change turret
V12-100L hydraulic ; V12-live tooling (ODT-N-25)
TOOL SIZE H4-0350 : 32 mm
V8-160 : 40 mm
TAILSTOCK :    
QUILL DIAMETER 165mm rotary quill
QUILL TRAVERSE 250 mm
TAILSTOCK CENTER MT#6
BODY MOVEMENT Motorized
QUILL MOVEMENT Electric/Manual (STD) ; Hydraulic (OPT)
FEED : LD 45 LD 48
X-AXIS RAPID TRAVERSE 1M~3M:6M/min ; 4M~7M:5M/min
X-AXIS BALLSCREW DIAMETER Ø40mm*P5
X-AXIS FEED RANGE 0.1mm/min~3000mm/min
X-AXIS TRAVERSE 650 mm
X-AXIS SERVO MOTOR 3KW (FANUC αi)
Z-AXIS RAPID TRAVERSE 1M~3M:6M/min ; 4M~5M:5M/min ; 6M~7M:4M/min
Z-AXIS BALLSCREW DIAMETER 1M~5M:Ø63mm*p10 ; 6M~7M:Ø80mm*p10
Z-AXIS FEED RANGE 0.1mm/min~3000mm/min
Z-AXIS TRAVERSE 1,000mm/2,000mm/3,000mm/4,000mm/5,000mm/6,000mm/7,000mm
Z-AXIS TRANSMITTING 1~3M:Directly Coupling ; 4~7M: 1:4 Precision gear reducer
Z-AXIS SERVO MOTOR 4KW (FANUC αi)
STANDARD ACCESSORIES :    
LUBRICATION PUMP 25 W
COOLANT PUMP 1/2HP high pressure
HYDRAULIC PUMP 2HP
CHIP REMOVING STD. FRONT & REAR CHIP CONVEYOR
OPT. REAR CHIP CONVEYOR ONLY
GUARD STD. REAR SPLASH GUARD + FRONT TWO DOORS
OPT. FULLY ENCLOSED GUARDING (ONLY AVAILABLE FOR 1M~5M)
 
NOTE :
(1) X and Z axes actual cutting diameter will change when equipped with different turrets.
(2) Spindle speed will change according to different motors.
(3) Machine length does not include the length of chip conveyor.
(4) Distance between centers will change based on installing different types of tailstocks.
(5) Machine betwen center over 6000mm, Z-axis linear is reqipred to option.

APPLICATIONS

 

 



 

 

 

LC series




DIMENSION



WEIGHT

LC Series 1000 1500 2000 3000 4000
34" LxWxH (mm) 3,230x2,500x2,000 3,730x2,500x2,000 4,230x2,500x2,000 5,230x2,500x2,000 6,330x2,500x2,000
N.W/G.W 10,000/12,000 kg 10,500/12,500 kg 12,000/14,000 kg 13,500/15,700 kg 15,000/17,400 kg
38" LxWxH (mm) 3,230x2,500x2,000 3,730x2,500x2,000 4,230x2,500x2,000 5,230x2,500x2,000 6,330x2,500x2,000
N.W/G.W 10,500/12,500 kg 11,000/13,000 kg 12,500/14,500 kg 14,000/16,200 kg 15,600/17,500 kg

 

LC Series 5000 6000 7000 8000
34" LxWxH (mm) 7,330x2,500x2,000 8,330x2,500x2,000 9,330x2,500x2,000 9,330x2,500x2,000
N.W/G.W 16,500/19,100 kg 18,600/20,800 kg 19,500/22,500 kg 21,000/24,200 kg
38" LxWxH (mm) 7,330x2,500x2,000 8,330x2,500x2,000 9,330x2,500x2,000 9,330x2,500x2,000
N.W/G.W 17,000/18,600 kg 18,500/21,300 kg 19,000/22,200 kg 21,500/24,700 kg


SPECIFICATIONS

MODEL LC 34 LC 38
SWING OVER BED 870 mm 970 mm
SWING OVER CROSS SLIDE 500 mm 600 mm
CENTER HEIGHT 440 mm 490 mm
WIDTH OF CARRIAGE 885 mm
WIDTH OF CROSS SLIDE 350 mm
DISTANCE BETWEEN CENTERS 1,150mm / 2,150mm / 3,150mm / 4,150mm /
5,150mm / 6,150mm / 7,150mm
CONTROL STD. FANUC 0iTC
OPT. FANUC 21iTB ; SIEMENS 810D
WIDTH OF BED 560mm(22")
BED WAY 3-V way with 1 flat way
MACHINE LENGTH 6,330mm / 7,330mm / 8,330mm / 9,330mm
HEADSTOCK :    
SPINDLE BORE Ø105mm(4") Ø153mm(6") Ø230mm(9") Ø305mm(12")
SPINDLE NOSE A2-8 A2-11 A2-15 A2-20
SPINDLE SPEED 13~1200rpm 6.5~600rpm 6~400rpm 4~400rpm
SPINDLE CENTER 105mm/153mm(4"/6") : MT#5 ; 230mm/305mm(9"/12") : MT#6
SPINDLE POWER 22/26 KW (FANUC αi)(STD) ; 30/37KW (OPT)
TURRET :    
TURRET MODE STD. H4-250 hydraulic ; V8-100L hydraulic
OPT. H4-250 VDI hydraulic ; Quick change turret
V12-100L hydraulic ; V12-live tooling (ODT-N-25)
TOOL SIZE 32 mm
TAILSTOCK :    
QUILL DIAMETER 165mm rotary quill
QUILL TRAVERSE 200 mm
TAILSTOCK CENTER MT#6
BODY MOVEMENT Motorized
QUILL MOVEMENT Electric/Manual (STD) ; Hydraulic (OPT)
FEED : LC 34 LC 38
X-AXIS RAPID TRAVERSE 6M/min
X-AXIS BALLSCREW DIAMETER Ø40mm*P5
X-AXIS FEED RANGE 0.1mm/min~3000mm/min
X-AXIS TRAVERSE 500 mm
X-AXIS SERVO MOTOR 3KW (FANUC αi)
Z-AXIS RAPID TRAVERSE 4M~5M:6M/min ; 6M~7M:5M/min
Z-AXIS BALLSCREW DIAMETER 4M~5M:Ø63mm*p10 ; 6M~7M:Ø80mm*p10
Z-AXIS FEED RANGE 0.1mm/min~3000mm/min
Z-AXIS TRAVERSE 4,000mm / 5,000mm / 6,000mm / 7,000mm
Z-AXIS TRANSMITTING Servo motor transmitted through 1:4 precision gear reducer
Z-AXIS SERVO MOTOR 4KW (FANUC αi)
STANDARD ACCESSORIES :    
LUBRICATION PUMP 25 W
COOLANT PUMP 1/2HP high pressure
HYDRAULIC PUMP 2HP
CHIP REMOVING STD. FRONT & REAR CHIP CONVEYOR
OPT. REAR CHIP CONVEYOR ONLY
GUARD STD. REAR SPLASH GUARD + FRONT TWO DOORS
OPT. FULLY ENCLOSED GUARDING
 
NOTE :
(1) X and Z axes actual cutting diameter will change when equipped with different turrets.
(2) Spindle speed will change according to different motors.
(3) Machine length does not include the length of chip conveyor.
(4) Distance between centers will change based on installing different types of tailstocks.
(5) Machine betwen center over 6000mm, Z-axis linear is reqipred to option.

APPLICATIONS