English (United Kingdom)Viet Nam简体中文(中国)

Product Category

Support Online


Office in HCM City
+84-8-38449946
+84-8-38449947


Office In Ha Noi City
+84-4-35543470
+84-4-35543471


Mr Thao
0972 853 570


Office In Ha Noi City
0084.4.35543470


Office in HCM City
0983 899 233

Gear-pitch type auto tapping machine

JT-4508D

JT-4508D

AUTO TAPPING MACHINE WITH
INDEXING DISK
 FEATURE
* This machine with standard specification is available for mass production.
* Can be divided into 4,6,8,12,24.
* Equipped with auto recycle system for cutting oil.
* Can be installed the extra mold on the disk surface depending on the need of each work piece.
 

 

 

JT-4508C


AUTO TAPPING MACHINE WITH
INTERHANGING DISK
 FEATURE
* Fixed precise position 0.01mm, exchangeable and can be exchanged without oil rapidly and stably.
* The processing place and discharging place are separated which could be to increased safety to work.
* Easy to install auto pneumatic chuck or auto pneumatic chuck and other vice or jig on the disk surface.

 

JT-6532A

GEAR-PITCH TYPE AUTO TAPPING MACHINE
 FEATURE
* Vertical column is solid and treated by tempering to get rid of stress, surface is chrome plated, wear resisting and no rust.
* It's ideal for the rough thread; low run-speed is designed and adopted to create the perfect threads.
 EXAMPLE


Vertical type JT-6532 Weight(about 310kg)
Main spindle
max. stroke
(mm)
Type of the
front side of
Main spindle
(mm)
Diameter of
thread (mm)
Up and Down moving
distance of the head
(mm)
Distance between
the main spindle
and the table
(mm)
Working table
size(mm)
65 MT-3# 10~32 450 600 340X380
Motor Main spindle speed
(R.P.M.)
Auto feeding thread
pitch for which
suits machine
Max. capacity of
Multi-spindle
Packing
dimension
(cm)
G.Weight
(kg)
50HZ 60HZ Range of TPI mm m/m
m/m standard
thread pitch
3PH
6P
1.5KW
(2 HP)
280
150
80
340
180
100
19,16,14,18,13
12,11,10,7
9,8

1.5,1.75,2.0,
2.5,3.0,3.5

10X10 spindles
16X4 spindles
20X2 spindles
103 X 70 X 137
(L)X(W)X(H)
380
 

JT-6516A

altProduct ID: JT-6516A

If vertical machine can not fit in with the working conditions, it can be replaced by horizontal special purpose machine.

  • Free to exchange tiny pitch.
  • Quick and easy to exchange.
  • Gear drives with merely one side teeth without slots.
  • Slow revolving, wear resisting
  • Because one running is for each tapping thread, it can taps perfect thread's rings to let the tap enlarge the using life time, the accuracy gets the standard of the gauge, the working piece cannot pull jumping while the tapping is backing action, it can simplify the fixture, the working pieces don't pressure or holding, they only avoid anti-rotation to tapping job.

  • Specifications

    Horizontal type JT-6516A (Weight about 105kg)
    Type of the front side of Main spindle(mm) Diameter of thread(mm) Main spindle max. stroke(mm) Gross Weight(kg)

    MT-2#/ER-20

    collet

    Ø5~Ø16

    65 133
    Main spindle speed (R.P.M.) Auto feeding thread pitch for which suits machine Max. capacity of Multi-spindle Motor
    50HZ 60HZ Range of TPI mm

    590

    400

    260

    720

    480

    300

    40

    32

    28

    27

    26

    24

    20

    19

    18

    16

    14

    13

    12

    11

    10

    (0.4)

    (0.45)

    (0.5)

    (0.6)

    0.7

    0.75

    0.8

    0.9

    1.0

    1.25

    1.5

    1.75

    1.8

    2.0

    2.4

    2.5

    Ø6x9 spindles

    Ø8x4 spindles

    Ø12x2 spindles

    3PH

    6P

    0.75KW

    (1HP)

 

JT-4508A

altProduct ID:JT-4508A

If vertical machine can not fit in with the working conditions, it can be replaced by horizontal special purpose machine.

  • Free to exchange tiny pitch.
  • Quick and easy to exchange.
  • Gear drives with merely one side teeth without slots.
  • Slow revolving, wear resisting
  • Because one running is for each tapping thread, it can taps perfect thread's rings to let the tap enlarge the using life time, the accuracy gets the standard of the gauge, the working piece cannot pull jumping while the tapping is backing action, it can simplify the fixture, the working pieces don't pressure or holding, they only avoid anti-rotation to tapping job.

Specifications

Horizontal type JT-4508(Weight about 50kg)
Type of the front side of Main spindle(mm) Diameter of thread(mm) Main spindle max. stroke(mm) Gross Weight(kg)

JT-2/CT12

tapping collet

Ø2~Ø8 Less than

(Ø10)

45

75

Main spindle speed (R.P.M.) Auto feeding thread pitch for which suits machine Max. capacity of Multi-spindle Motor
50HZ 60HZ Range of TPI mm

1340

760

420

1600

900

500

80

72

64

60

56

48

44

40

36

32

28

27

26

24

20

19

18

(16)

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1.0

1.2

1.25

(1.5)

(1.75)

Ø3x10 spindles

Ø4x5 spindles

Ø5x2 spindles

3PH

4P

0.37KW

(1/2HP)

 
<< Start < Prev 1 2 3 Next > End >>
Page 1 of 3