JT-4508D
|
JT-4508D |
AUTO
TAPPING MACHINE WITH
INDEXING DISK |
| FEATURE |
| * |
This
machine with standard specification is available for mass production. |
| * |
Can
be divided into 4,6,8,12,24. |
| * |
Equipped
with auto recycle system for cutting oil. |
| * |
Can
be installed the extra mold on the disk surface depending on
the need of each work piece. |
|
|
|
JT-4508C
|
AUTO
TAPPING MACHINE WITH
INTERHANGING DISK |
| FEATURE |
| * |
Fixed precise
position  0.01mm,
exchangeable and can be exchanged without oil rapidly and stably. |
| * |
The processing
place and discharging place are separated which could be to
increased safety to work. |
| * |
Easy to
install auto pneumatic chuck or auto pneumatic chuck and other
vice or jig on the disk surface. | |
|
JT-6532A
| GEAR-PITCH
TYPE AUTO TAPPING MACHINE |
| FEATURE |
| * |
Vertical
column is solid and treated by tempering to get rid of stress,
surface is chrome plated, wear resisting and no rust. |
| * |
It's ideal
for the rough thread; low run-speed is designed and adopted
to create the perfect threads. | EXAMPLE
|
| Vertical
type JT-6532 Weight(about
310kg)
Main
spindle
max. stroke
(mm) |
Type
of the
front side of
Main spindle
(mm) |
Diameter
of
thread (mm) |
Up
and Down moving
distance of the head
(mm) |
Distance
between
the main spindle
and the table
(mm) |
Working
table
size(mm) |
| 65 |
MT-3# |
 10~32 |
450 |
600 |
340X380 |
| Motor |
Main
spindle speed
(R.P.M.) |
Auto
feeding thread
pitch for which
suits machine |
Max.
capacity of
Multi-spindle |
Packing
dimension
(cm) |
G.Weight
(kg) |
| 50HZ |
60HZ |
Range
of TPI |
mm |
m/m
m/m standard
thread pitch |
3PH
6P
1.5KW
(2 HP) |
280
150
80 |
340
180
100 |
19,16,14,18,13
12,11,10,7
9,8 |
1.5,1.75,2.0,
2.5,3.0,3.5 |
10X10
spindles
16X4 spindles
20X2 spindles |
103
X 70 X 137
(L)X(W)X(H) |
380 |
|
JT-6516A
 Product ID: JT-6516A
If vertical machine can not fit in with the working conditions, it can be replaced by horizontal special purpose machine.
- Free to exchange tiny pitch.
- Quick and easy to exchange.
- Gear drives with merely one side teeth without slots.
- Slow revolving, wear resisting
- Because one running is for each tapping thread, it can taps perfect thread's rings to let the tap enlarge the using life time, the accuracy gets the standard of the gauge, the working piece cannot pull jumping while the tapping is backing action, it can simplify the fixture, the working pieces don't pressure or holding, they only avoid anti-rotation to tapping job.
-
Specifications
| Horizontal type JT-6516A (Weight about 105kg) |
| Type of the front side of Main spindle(mm) |
Diameter of thread(mm) |
Main spindle max. stroke(mm) |
Gross Weight(kg) |
|
MT-2#/ER-20
collet |
Ø5~Ø16 |
65 |
133 |
| Main spindle speed (R.P.M.) |
Auto feeding thread pitch for which suits machine |
Max. capacity of Multi-spindle |
Motor |
| 50HZ |
60HZ |
Range of TPI |
mm |
|
590
400
260 |
720
480
300 |
40
32
28
27
26
24
20
19
18
16
14
13
12
11
10 |
(0.4)
(0.45)
(0.5)
(0.6)
0.7
0.75
0.8
0.9
1.0
1.25
1.5
1.75
1.8
2.0
2.4
2.5 |
Ø6x9 spindles
Ø8x4 spindles
Ø12x2 spindles |
3PH
6P
0.75KW
(1HP) |
JT-4508A
Product ID:JT-4508A
If vertical machine can not fit in with the working conditions, it can be replaced by horizontal special purpose machine.
- Free to exchange tiny pitch.
- Quick and easy to exchange.
- Gear drives with merely one side teeth without slots.
- Slow revolving, wear resisting
- Because one running is for each tapping thread, it can taps perfect thread's rings to let the tap enlarge the using life time, the accuracy gets the standard of the gauge, the working piece cannot pull jumping while the tapping is backing action, it can simplify the fixture, the working pieces don't pressure or holding, they only avoid anti-rotation to tapping job.
Specifications
| Horizontal type JT-4508(Weight about 50kg) |
| Type of the front side of Main spindle(mm) |
Diameter of thread(mm) |
Main spindle max. stroke(mm) |
Gross Weight(kg) |
|
JT-2/CT12
tapping collet |
Ø2~Ø8 Less than
(Ø10) |
45 |
75 |
| Main spindle speed (R.P.M.) |
Auto feeding thread pitch for which suits machine |
Max. capacity of Multi-spindle |
Motor |
| 50HZ |
60HZ |
Range of TPI |
mm |
|
1340
760
420 |
1600
900
500 |
80
72
64
60
56
48
44
40
36
32
28
27
26
24
20
19
18
(16) |
0.4
0.45
0.5
0.6
0.7
0.75
0.8
0.9
1.0
1.2
1.25
(1.5)
(1.75) |
Ø3x10 spindles
Ø4x5 spindles
Ø5x2 spindles |
3PH
4P
0.37KW
(1/2HP) |
|
|
|
|
|
<< Start < Prev 1 2 3 Next > End >> |
|
Page 1 of 3 |
