ENGINE LATHE SERIES CH430/500
Product No: CH430/500
Product Name: ENGINE LATHE SERIES
Product Intro:
 |
 |
 |
Machine Feature：
Ground and hardened gears and bed way.3 precision bearings supported spindle driven by single speed motor delivers full power at all 12 speeds
Dual gear box for easy switch of inch and metric threadsMechanical overload deviCe in Carriage.
Auto spray and forced feed lube system in headstock and carriage.
Low voltage controls for extra safety operation
| STANDARD ACCESSORIES |
OPTIONAL ACCESSORIES | |||
|
Main motor
Centre sleeve ( MT 4,6 ) Coolant equipment Tool box with tool kits Square tool post with wrench |
3 jaw universal chuck 4jaw independent chuck Drive plateDrive plate Face plate Work light / quartz work light Taper attchment Splash guard (10 HP) (for CH-V series) Steady rest Follow rest |
 Headstock
|
| SPECIFICATIONS |
430X750/
V430x750
(17X30") |
430X1000/
V430x1000
(17X40") |
430X1500/
V430x1500
(17X60") |
430X2000/
V430x2000
(17X80") |
500X1000/
V500X1000
(20X40") |
500X1500/
V500x1500
(20X60") |
500X2000/
V500x2000
(20X80") | |
|
GENERAL
CAPACITY |
Center height | 215mm (8-1/2") | 250mm (10") | |||||
|
Swing over bed |
430mm (17") | 500mm (20") | ||||||
|
Swing over gap |
660mm (26") | 730mm (28") | ||||||
|
Swing over cross slide |
245mm (9-5/8") | 280mm (11") | ||||||
|
Distance between
centers |
695mm
(27.4") |
1000mm
(39.37") |
1500mm
(59.05") |
2000mm
(80") |
1000mm
(39.37") |
1500mm
(59.05") |
2000mm
(80") | |
|
MAIN
SPINDLE |
Spindle nose | A 1-6 or D1-6 | ||||||
| Spindle bore diameter | 58mm (2-1/4") | |||||||
| Taper of spindle bore | MT6 | |||||||
| Taper of center | MT4 | |||||||
| Spindle speeds | 50-1800rpm (12 steps) | |||||||
|
Spindle speeds
(INVERTER"V") |
H:586~2300rpm M:157~586rpm L:42~157rpm (3 steps) | |||||||
| CARRIAGE | Cross slide travel | 220mm (8-5/8") | 250mm (10") | |||||
| Compound rest travel | 180mm (7") | |||||||
| Max. size cutting tool | 25 X 25mm (1"X1") | |||||||
| TAILSTOCK | Spindle diameter | 58mm (2-1/4") | ||||||
| Spindle travel | 150mm (6") | |||||||
| Taper of center | MT4 | |||||||
| BED | Bed width | 300 mm (11-7/8") | ||||||
| Bed length |
1600mm
(63") |
1950mm
(78") |
2440mm
(98") |
2960mm
(119") |
1950mm
(78") |
2440mm
(98") |
2960mm
(119") | |
|
THREADING
& FEEDING |
System | Metric system | Inch system | |||||
| Pitch of leadscrew | 35Ø , 6 mm/pitch | 4TPI | ||||||
| Metric pitch threads | 0.5~0.7 mm/pitch (22 kinds) | |||||||
| Inch pitch threads | 4~56 TPI (36 kinds) | |||||||
| Module pitch threads | 0.5~3.5 M.P. (12 kinds) | |||||||
| Diametral pitch threads | 8~56 D.P. (21 kinds) | |||||||
|
Range of longitudinal feeds |
0.05~0.70 mm/rev. (0.002~0.028"/rev.) | |||||||
| Range of cross feeds | 0.025~0.35 mm/rev. (0.001~0.014"/rev.) | |||||||
| POWER | Main drive motor | 5HP (7.5 HP Inverter) | 7.5HP (10 HP Inverter) | |||||
| Coolant pump motor | 1/8 HP | |||||||
|
FLOOR DIMENSION |
1900X720
mm |
2150X720
mm |
2650X720
mm |
3150X720
mm |
2150X720
mm |
2650X720
mm |
3150X720
mm | |
|
NET WEIGHT |
1500 kg | 1600 kg | 1800 kg | 2000 kg | 1800 kg | 2000kg | 2200 kg | |
|
GROSS WEIGHT |
1700 kg | 1800 kg | 2000 kg | 2200 kg | 2000 kg | 2200kg | 2400 kg | |
|
PACKING SIZE APPROX.
(L x W x H) |
2100/2300/2800/3300X1000X1640mm | 2300/2800X3300X1000X1720mm | ||||||
※Specificationd are subject to change without notice for further design improvement.
